Notice

This site uses profiling cookies of third parties. If you want either to know more or to refuse consent to all or just some cookies, please click here.
By clicking on any element on the page you accept the use of cookies.

Produktneuheiten

PD86 SENSOR SERIES TO ENSURE SAFE AND RELIABLE DETECTION FOR INDUSTRIAL DOOR INSTALLATION

The new PD86xAP12.. is a stylish and versatile polarized retro- reflective sensor for safe detection even of shiny objects.

Lainate, May 2018 - Carlo Gavazzi Automation, the international electronics group with activities in the design,manufacture and marketing of electronic equipmentpresents the new PD86xAP12..sensor, specifically designed for industrial doors.

This photoelectric sensor has been developed from the PMP12 sensor series, whose very solid value has been proven by over 1 million pieces sold in the doors market.Its long sensing distance of 12 m and the 80 mm-diameter reflector ensure a large operational margin even when installed in dusty environment or when exposed to harsh conditions.

The PD86 new design includes a protective cover made of ZAMAK5 or polycarbonate and a watertight construction with no visible screws, so as to avoid acts of vandalism and corrosion, which could cause a decrease in sensing distance.

“One of the main features of this sensor is its easy alignment by means of a single screw for horizontal and one for vertical adjustment of the PCB inside the housing, making this product highly flexible and adaptable to any installation,” Torben Rochat, International Product Manager, says. “We believe that the launch of this new device will allow us to strengthen our position in the market dedicated to doors, fulfilling the ever-growing requirements for a modern and friendly design for industrial doors.”

Developed in our Competence center in Denmark, the PD86 is used to detect the presence of people and/or vehicles in Industrial Door applications.

Main technical features
• 12-24 V AC/DC power supply
• Detection angle +/- 1.5 degrees
• Horizontal and vertical alignment of +/- 4.5 degrees
• Cable exit on the back or through an opening in the ZAMAK or polycarbonate housing
• Proven immunity against foreign light
• SPST relay output
• Strong housing in Basalt Grey ZAMAK or polycarbonate,front-glass in Red- PMMA
• Fixed or detachable screw terminals
• Dipswitch for inverting the relay
• Dipswitch for setting the test input to a normally high or normally low position.
• Two leds, yellow for output on and the green LED for power and dirty lens or misalignment indication
• -25° to +60 °C
• UL325 and UL508 approved
• Compliant with EN12445, EN12453 and EN12978 regulations, ESPE cat. 2, PL. C
• High immunity against water IP66

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20020 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

CERTUS MULTIFUNCTION SAFETY MODULES: THE COMPACT SOLUTION FOR RELIABLE PROTECTION

High flexibility and considerable cost savings.

Lainate, April 2018 - Carlo Gavazzi Automation, the international electronics group with activities in the design,manufacture and marketing of electronic equipment, today presents four new safety modules, part of our Certus family.

These safety modules are able to monitor multiple safety functions of industrial machinery, protecting operators from dangerous moving parts of the machine, and are compliant with international standards.

The Certus multifunction safety modules consist of the following devices for industrial applications: the CM22D0A, a safety module with configurable outputs using a hex-switch and the CM40D0A and CM30D1A safety modules, which provide safety-related interruption of a safety circuit. They are used in applications with: E-stop, E-gate, limit switch, non contact switch, safety light curtains (ESPE Type 4, Type 2), safety light beam (single beam), safety mat.

The CL20D2A safety module is designed to be used in lift installations for floor levelling and re-levelling of the cabin. It is connected to the lift plant and to the lift controller board.

“With the launch of this new safety modules series, Carlo Gavazzi enhances its portfolio dedicated to safety, providing the highest level of protection for equipment and personnel”, Gianluigi Abenante, International Product Manager, states. “We are confident that these new modules will be warmly welcomed by the market, due to their multiple safety functions and competitive price.”

The Certus multifunction safety modules are targeted at specific applications such as machine centres with alternate load/unload, palletising system with robotic cells in the Packaging&Wrapping, Food&Beverage and Materials Handling markets, or cabin levelling in the Lifts&Escalators market.

Main technical features
• 4 OSSD safety outputs. Certus provides up to 4 Output Signal Switching Devices.
• Selectable delay time. Can be easily set through the hex-switch, selected from a choice of 15 pre-set configurations, from 0 to 30 sec. The main model CM22D0A can include 2 delayed digital outputs
• 2 auxiliary outputs. All the modules provide at least 1 auxiliary output. 2 auxiliary outputs for CL20D2A
• Compact dimensions: 1 DIN module 18x90x63 mm
• Lift Directive Compliance (EN81-20, EN81-50) (CL20D2A module only)
• Cat. 4 PL e in accordance with ISO 13849-1, SIL 3 in accordance with IEC 62061, SILcl 3 in accordance with IEC 61508
• TÜV approved

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20020 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

Messen und Veranstalltungen

Eliaden 29 May-31 May 2018 Lillestrøm-Norway
Expo Pack Mexico 05 Jun-08 Jun 2018 Mexico City-Mexico
Guangzhou Electrical Building Technology 09 Jun-12 Jun 2018 Guangzhou-China

Terminvorschau

Parkex 13 Jun-14 Jun 2018 Birmingham-UK
Infracom 14 Jun-14 Jun 2018 Johannesburg-South Africa
EM-Power 20 Jun-22 Jun 2018 Munich-Germany
Fispal Tecnologia 26 Jun-29 Jun 2018 São Paulo-Brazil
Taipei International Automation Industry Exhibition 01 Aug-04 Aug 2018 Taipei City-Taiwan
Sindex 28 Aug-30 Aug 2018 Bern-Switzerland
Euro Expo 05 Sep-06 Sep 2018 Molde-Norway
Expo Nacional Ferretera 06 Sep-08 Sep 2018 Guadalajara-Mexico
Automatik 11 Sep-13 Sep 2018 Brøndby-Denmark
InnoTrans 18 Sep-21 Sep 2019 Berlin-Germany
International Automation Show 19 Sep-23 Jun 2018 Shanghai-China
Bis 06 Oct-14 Oct 2018 Gent-Belgium
Energy Business Forum 09 Oct-10 Oct 2018 Rimini-Italy
Scanautomatic 09 Oct-11 Oct 2018 Göteborg-Sweden
Pack Expo 14 Oct-17 Oct 2018 Chicago, IL-USA
Home & Building 17 Oct-18 Oct 2018 Verona-Italy
Kistamässan 17 Oct-18 Oct 2018 Stockholm-Sweden
Euro Expo 24 Oct-26 Oct 2018 Tromsø-Norway
IBS 06 Nov-07 Nov 2018 Paris-France
CIPHEX West 07 Nov-08 Nov 2018 Calgary, AB-Canada
Concapan 07 Nov-09 Nov 2018 San Salvador-El Salvador
Euro Expo 07 Nov-08 Nov 2018 Örnsköldsvik-Sweden
Smart Buildings Show 07 Nov-08 Nov 2018 London-UK
Bouwxpo 09 Nov-11 Nov 2018 Kortrijk-Belgium
Matelec 13 Nov-16 Nov 2018 Madrid-Spain
ATX 14 Nov-15 Nov 2018 Montreal, QC-Canada
ELECTRICX 17 Nov-19 Nov 2018 Cairo-Egypt
EMEX 21 Nov-22 Nov 2018 London-UK
Sps / Ipc / Drives 27 Nov-29 Nov 2018 Nuremberg-Germany
Data Centre World 27 Nov-28 Nov 2018 Paris-France