Carlo Gavazzi Automation

White papers See all

CYBERSECURITY WHITE PAPER

The importance of cybersecurity in Energy Management Systems

This document will help decision makers, system integrators, installers and end-users of Energy Management Systems (EMS), including both the Energy Monitoring and Building Automation parts, to decide if cybersecurity should be considered while designing/deploying/proposing a new EMS.

Get the document to read more

CYBERSECURITY

VPN IN OPERATIONAL TECHNOLOGY WHITE PAPER

Secure remote access in building automation and energy monitoring applications.

This document aims at presenting system integrators, installers and operators of energy monitoring and building automation applications a solution to protect their remote access to the target system. The proposed solution is a secure Virtual Private Network (henceforth VPN) tunnelling, described in the following chapters.

Get the document to read more

PHASE OR NEUTRAL LOSS

Nouveaux produits See all

RSGT SERIES: GENERAL PURPOSE SELF-LEARNING SOFT STARTER FOR 3-PHASE AC INDUCTION MOTORS UP TO 45 KW

Minimal setting thanks to the self-learning algorithm and real-time monitoring.

Lainate, July 2021 - Carlo Gavazzi Automation, the international electronics group with activities in the design, manufacture and marketing of electronic equipment, today presents its new series of soft starters.

The RSGT family is very easy to use soft-starters for AC 3-phase induction motors. In order to maximise the ease of use without compromising performance, only 3 settings are required (FLC, ramp-up, ramp-down).

The self-learning algorithm adjusts the soft starter’s parameters to work with different applications and varying load conditions. It is active at every start to ensure that the motor starts with the optimal settings all the time.The RSGT soft-starters are equipped with a Modbus/RTU communication port with a 2-wire RS485 connection, allowing the user to have a complete and easy real-time monitoring of the product. This serial communication protocol enables the detection of any deviations in performance and also provides sufficient historical data that facilitates troubleshooting activity in case of faults.

The integration of a Class 10 electronic overload provides an advanced motor protection and results in further space saving in the electrical panel. Phase sequence protection, overload function and dry run function can be easily enabled and disabled through the frontal push button.

“The drive for higher energy efficiency is impacting the world of industrial motors. As of July 2021, 3-phase motors from 0.75 kW to 1,000 kW must be IE3 efficiency or higher. Starting currents of higher efficiency motors can reach more than 10 times the motor rated current and the RSGT soft starters can counteract this issue by reducing the starting current by an average of 50%,” Brian Gauci International Product Specialist says. “With this launch it is our intention to further strengthen our product portfolio by enhancing the line of soft starters for general purpose applications and making it more attractive to distributors as well as expanding to North America and Europe.”

Developed in our competence centre in Malta, this soft starter series has been designed to provide our customers with a more advanced product offering in the HVAC, Water treatment, Agriculture and the Smart building market segments.

Main technical features
• Self-learning algorithm: optimises motor starts in every condition
• Best in class current reduction with three phase control
• Easy to use and set-up time savings: only 3 adjustments required
• Energy saving through internal bypass relays
• Robust design allows up to 12 starts per hour
• Torque controlled ramp down: smoother deceleration of pumps
• Versions up to 400 VAC are internally supplied: less wiring required
• Real-time monitoring via Modbus RTU communication over RS485 connection

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20045 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

THE NRG DIGITAL SOLID STATE RELAYS CAN NOW ADAPT TO LINE VOLTAGE VARIATIONS

Ensuring stable power output for optimal product quality.

Lainate, July 2021 - Carlo Gavazzi Automation, the international electronics group with activities in the design, manufacturing, and marketing of electronic equipment, today presents a new feature on the NRG digital solid state relays, the voltage compensation.

With switching, monitoring and diagnostic capabilities available via the communication interface, the NRG digital solid state relays provide greater connectivity in industrial automation machinery offering manufacturers unlimited opportunities to improve productivity, predict equipment failure and provide remote access possibilities down to the solid state relay level.

Variation in mains voltage is a common issue that impairs the accuracy of the heating process. With voltage compensation, the NRG solid state relays are able to keep a constant power output despite any voltage fluctuations. Available on the RGx1P..N variants, voltage compensation ensures reduction of scrap and improved end-product quality.

“This new feature will complement the switching functionality of the NRG solid state relays to guarantee better temperature regulation”, Dora Lee Borg International Product Specialist says. “This is particularly useful for sensitive heating applications and also open loop temperature control systems.”

Developed in our competence centre in Malta, the NRG has been designed to suit any heating application where precise temperature control is crucial and where unplanned machine stoppages can result in a considerable loss of revenue.

Typical applications are plastic injection machines, packaging machines, drying and curing processes, semiconductor manufacturing, and glass tempering machines.

Main technical features
• NRG controller with PROFINET, EtherNET/IP™ or Modbus RTU interface
• Max. 32 NRG solid state relays (RG..CM..N) in 1 NRG bus chain
• NRG solid state relays go up to 660 VAC 65 A, 90 A (versions without heatsink)
• Selectable switching modes: ON/OFF, Burst, Advanced Full Cycle, Distributed Full Cycle, Phase Angle and Soft Start
• Voltage Compensation
• Predictive failure detection with Load deviation indication
• Read-outs: Current, Voltage, Power, Energy consumption kWh, Load and SSR Running hours
• Malfunction detection: Mains loss, Load loss, SSR short circuit, SSR over-temperature, Voltage/ Current / Frequency out-of-range

ABOUT CARLO GAVAZZI AUTOMATION
Carlo Gavazzi Automation is an international electronics group with activities in the design, manufacture and marketing of electronic equipment targeted at the global markets of industrial and building automation. Carlo Gavazzi Automation provides customers with technologically innovative, high quality and competitive solutions, in compliance with their requirements and expectations through its 22 National Sales Companies in Europe, the Americas and Asia & Pacific, operating with its production sites in Denmark, Italy, Malta, Lithuania and China.

For further information:
Carlo Gavazzi Automation SpA - Via Milano 13 – 20045 Lainate (MI) - Italy Marketing & Communication - info@gavazziautomation.com - www.gavazziautomation.com

Salons et Evénements See all

Effie Eficiencia 19 Oct-24 Oct 2021 -
Smart Automation Austria 19 Oct-21 Oct 2021 Linz-Austria

Prochaines dates à retenir

ELiSØR 19 Oct-20 Oct 2021 Kristiansand-Norway
Intelligent Building Systems 20 Oct-21 Oct 2021 Paris-France
AHTD Fall Conference 20 Oct-22 Oct 2021 Colorado Springs, CO-USA
World Energy Engineering Congress 20 Oct-22 Oct 2021 New Orleans, LA-USA
EL I NORD 26 Oct-26 Oct 2021 Bodø-Norway
SEC (SMART ENERGY CONGRESS) 27 Oct-28 Oct 2021 Madrid-Spain
EL I NORD 28 Oct-28 Oct 2021 Tromsø-Norway
CIPHEX West 03 Nov-04 Nov 2021 Vancouver, BC-Canada
ADM ATX Canada 09 Nov-11 Nov 2021 Toronto, ON-Canada
Elmia Subcontractor 09 Nov-12 Nov 2021 Jönköping-Sweden
EL I VEST 10 Nov-11 Nov 2021 Bergen-Norway
Data Center World 23 Nov-24 Nov 2021 Paris-France
Sps smart production solutions 23 Nov-25 Nov 2021 Nuremberg-Germany
EMEX 24 Nov-25 Nov 2021 London-UK
ENLIT EUROPE 30 Nov-02 Dec 2021 Milan-Italy
Taipei International Automation Industry Exhibition 15 Dec-18 Dec 2021 Taipei City-Taiwan