Carlo Gavazzi Automation

Safety modules

Carlo Gavazzi's safety modules, in accordance with the standards ISO 13849-1 and IEC 61508, are used in many different types of industrial machinery and sectors such as plastics, food and beverage, packaging, lifts and escalators, automotive and mining, wherever the machinery could pose a risk to people. Multiple inputs are available: e-stop, light curtains, e-gate, limit switch, interlock, magnetic sensor, mat, single beam sensor, two hands and speed control.

Product Selector

Safety inputs
Class type EN 574
EN 954-1
EN ISO 13849-1 PL
Safety instantaneous outputs
Auxiliary outputs
Auxiliary PNP outputs
SM2H21 Safety module for Two-hand control consoles type IIIC; 2NO safety outs, 1NC aux output; Cat.4, PLe EN13849-1 Machine Directive; 24Vdc/Vac power supply; -25C-+60C operating temperature; IP20
Datasheet PDF-Data Safety instantaneous outputs:  2 Class type EN 574:  Type III C
Manual PDF-Data Auxiliary outputs:  1 EN 954-1:  Cat. 4
Brochure PDF-Data Auxiliary PNP outputs:  1 EN ISO 13849-1 PL:  Level e
SISTEMA library SM2H21.zip Safety inputs:  2-channels change-over   Detachable screw terminals


PDF-Data

ItemCode Description
SM2H21 Safety module for Two-hand control consoles type IIIC; 2NO safety outs, 1NC aux output; Cat.4, PLe EN13849-1 Machine Directive; 24Vdc/Vac power supply; -25C-+60C operating temperature; IP20

SISTEMA Libraries

The following should be considered:
The EC machinery directive stipulates that machinery should not pose a danger (risk assessment in accordance with EN ISO 12100). The aim is to achieve an acceptable residual risk. If safety is dependent on control systems, these must be designed so that the probability of functional faults is sufficiently low. To meet this requirement, it makes sense to use harmonized standards like EN ISO 13849-1 to reach the best Performance Level (PLr): “Safety-related parts of control systems – Part 1: General principles for design”.
This standard may be applied to SRP/CS (safety-related parts of control systems) and all types of machinery, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical, etc.).
EN ISO 13849-1 also lists special requirements for SRP/CS with programmable electronic systems.

SISTEMA Assistant Software
Safety Integrity Software Tool for the Evaluation of Machine Applications.
SISTEMA is a software tool to calculate PL. It is provided by IFA as free software and considered to be the most widely recognized.
Please refer to the following link to download SISTEMA software and its instruction manual.

Products Libraries
Carlo Gavazzi provides SISTEMA Libraries for its safety products in order to assist customers' PL calculations.

PRODUCTS DATE DOWNLOAD
SM safety modulesFebruary 2020Download
CM multifunction safety modulesApril 2018Download
Safety modulesSeptember 2016Download
Programmable safety modulesSeptember 2016Download

Documentation

 

Safety Overview
Safety Modules
Certus Configurable Safety Module